Rik's Treehouse > Babbling in Binary > Tips 'n' Tricks > Hummingbird Exceed |
Unfortunately Exceed stopped working for me for a few months and I finally decided to do some research to see what the problem was. I thought I better post it so I don't forget and in case anybody else is having the same problem. All discussion is regarding Exceed 5 for Windows 95.
Problem: Whenever I try to run Exceed to connect I get the message
and then Exceed hangs. What's going on? How can I get it working again?
Solution: I had this problem. Everything seemed to be working okay and then (after a hardware upgrade) it just stopped working. I found a reference on the web which led me to try the following:
Run Xconfig and select Communication. Choose Mode: XDMCP-query then hit Configure.... Now, this is the important bit...check the Key: field. If it says xdmkey then delete this value. I have no idea what this does but when I cleared it, everything started working just fine! Finally, save all your changes and try again. Good luck!
[Rik's Office Hours] [Contact Rik] Last updated: Fri Apr 30 2004, 1:54pm |